Restarting a binary

COSMIC allows you to restart a binary from any point in its evolution from a COSMIC generated bpp array.

In [1]: from cosmic.sample.initialbinarytable import InitialBinaryTable

In [2]: from cosmic.evolve import Evolve

Below we provide an example of the same evolutionary track started from the beginning and three different points in the evolution:

  • sometime between the beginning and the first object going supernova

  • between the first and second supernova

  • after both supernova

In [3]: single_binary = InitialBinaryTable.InitialBinaries(
   ...:     m1=25, m2=20, porb=6000, ecc=0.0,
   ...:     tphysf=13700.0, kstar1=1, kstar2=1, metallicity=0.002
   ...: )
   ...: 

In [4]: SSEDict = {'stellar_engine': 'sse'}
In [5]: BSEDict = {
   ...:     "pts1": 0.001, "pts2": 0.01, "pts3": 0.02, "zsun": 0.014, "windflag": 3,
   ...:     "eddlimflag": 0, "neta": 0.5, "bwind": 0.0, "hewind": 0.5, "beta": 0.125,
   ...:     "xi": 0.5, "acc2": 1.5, "LBV_flag": 1, "alpha1": [1.0, 1.0],
   ...:     "lambdaf": 0.0, "ce2stageflag": 0, "ceflag": 0, "cekickflag": 2,
   ...:     "cemergeflag": 1, "cehestarflag": 0, "qcflag": 5,
   ...:     "qcrit_array": [0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0],
   ...:     "kickflag": 5, "sigma": 265.0, "bhflag": 1, "bhsigmafrac": 1.0,
   ...:     "sigmadiv": -20.0, "ecsn": 2.25, "ecsn_mlow": 1.6, "aic": 1, "ussn": 1,
   ...:     "polar_kick_angle": 90.0,
   ...:     "natal_kick_array": [[-100.0, -100.0, -100.0, -100.0, 0.0], [-100.0, -100.0, -100.0, -100.0, 0.0]],
   ...:     "mm_mu_ns": 400.0, "mm_mu_bh": 200.0, "remnantflag": 4,
   ...:     "fryer_mass_limit": 0, "mxns": 3.0, "fryer_fmix": 1.0,
   ...:     "fryer_mcrit_nsbh": 5.75, "rembar_massloss": 0.5, "wd_mass_lim": 1,
   ...:     "maltsev_mode": 0, "maltsev_fallback": 0.5, "maltsev_pf_prob": 0.1,
   ...:     "pisn": -2, "ppi_co_shift": 0.0, "ppi_extra_ml": 0.0, "bhspinflag": 0,
   ...:     "bhspinmag": 0.0, "grflag": 1, "eddfac": 10, "gamma": -2, "don_lim": -1,
   ...:     "acc_lim": [-1, -1], "smt_periastron_check": 0, "smt_q": -1, "tflag": 1,
   ...:     "ST_tide": 1,
   ...:     "fprimc_array": [2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0,2.0/21.0],
   ...:     "ifflag": 1, "wdflag": 1, "epsnov": 0.001, "bdecayfac": 1,
   ...:     "bconst": 3000, "ck": 1000, "rejuv_fac": 1.0, "rejuvflag": 0,
   ...:     "bhms_coll_flag": 0, "htpmb": 1, "ST_cr": 1, "rtmsflag": 0
   ...: }
   ...: 
# evolve the binary
In [6]: bpp, bcm, initC, kick_info = Evolve.evolve(initialbinarytable=single_binary, BSEDict=BSEDict, SSEDict=SSEDict)

In [7]: print("From beginning")
From beginning

In [8]: print(bpp)
          tphys     mass_1     mass_2  ...  bhspin_1  bhspin_2  bin_num
0      0.000000  25.000000  20.000000  ...       0.0       0.0        0
0      7.874629  24.411688  19.823083  ...       0.0       0.0        0
0      7.886566  24.407128  19.822598  ...       0.0       0.0        0
0      8.419117  22.865321  19.931095  ...       0.0       0.0        0
0      8.684362  19.209232  20.702743  ...       0.0       0.0        0
0      8.698975  18.945631  20.795256  ...       0.0       0.0        0
0      8.698975  10.604460  20.795256  ...       0.0       0.0        0
0      8.698975  10.604460  20.795256  ...       0.0       0.0        0
0      9.948208  10.604468  20.728562  ...       0.0       0.0        0
0      9.964123  10.604470  20.725065  ...       0.0       0.0        0
0     10.257069  10.604657  20.641627  ...       0.0       0.0        0
0     10.507232  11.333745   7.042773  ...       0.0       0.0        0
0     10.524522  11.337795   7.028271  ...       0.0       0.0        0
0     10.876583  11.337886   6.825786  ...       0.0       0.0        0
0     10.921662  11.337910   6.781842  ...       0.0       0.0        0
0     10.921662  11.337910   2.463362  ...       0.0       0.0        0
0  13700.000000  11.337910   2.463362  ...       0.0       0.0        0

[17 rows x 46 columns]

# assign row indices and find SNe
In [9]: bpp["row_iloc"] = list(range(len(bpp)))

In [10]: first_SN_iloc = bpp[bpp["evol_type"] == 15].iloc[0]["row_iloc"]

In [11]: second_SN_iloc = bpp[bpp["evol_type"] == 16].iloc[0]["row_iloc"]

In [12]: print("First SN Index: ", first_SN_iloc)
First SN Index:  5.0

In [13]: print("Second SN Index: ", second_SN_iloc)
Second SN Index:  14.0

# choose some inds to restart from
In [14]: before_SN_1 = int(first_SN_iloc // 2)

In [15]: between_SNe = int((first_SN_iloc + second_SN_iloc) // 2)

In [16]: after_SN_2 = int((second_SN_iloc + bpp["row_iloc"].max()) // 2)

In [17]: print("Restart Indices: ", before_SN_1, between_SNe, after_SN_2)
Restart Indices:  2 9 15
# restart from different points
In [18]: for i in [before_SN_1, between_SNe, after_SN_2]:
   ....:     new_initC = initC.copy()
   ....:     for column in bpp.columns:
   ....:         new_initC = new_initC.assign(**{column:bpp.iloc[i][column]})
   ....:     bpp_mid, bcm_mid, initC_mid, kick_info = Evolve.evolve(initialbinarytable=new_initC, BSEDict={})
   ....:     print("Started in middle at Index {0}".format(i))
   ....:     print(bpp_mid)
   ....: 
Started in middle at Index 2
          tphys     mass_1     mass_2  ...  bhspin_1  bhspin_2  bin_num
0      8.419117  22.865321  19.931095  ...       0.0       0.0        0
0      8.684362  19.209233  20.702742  ...       0.0       0.0        0
0      8.698975  18.945631  20.795256  ...       0.0       0.0        0
0      8.698975  10.604460  20.795256  ...       0.0       0.0        0
0      8.698975  10.604460  20.795256  ...       0.0       0.0        0
0      9.948208  10.604468  20.728562  ...       0.0       0.0        0
0      9.964123  10.604470  20.725065  ...       0.0       0.0        0
0     10.257069  10.604657  20.641627  ...       0.0       0.0        0
0     10.507232  11.333745   7.042773  ...       0.0       0.0        0
0     10.524522  11.337795   7.028270  ...       0.0       0.0        0
0     10.876583  11.337886   6.825786  ...       0.0       0.0        0
0     10.921662  11.337910   6.781842  ...       0.0       0.0        0
0     10.921662  11.337910   2.463362  ...       0.0       0.0        0
0  13707.886566  11.337910   2.463362  ...       0.0       0.0        0

[14 rows x 46 columns]
Started in middle at Index 9
          tphys     mass_1     mass_2  ...  bhspin_1  bhspin_2  bin_num
0     10.257069  10.604657  20.641627  ...       0.0       0.0        0
0     10.507232  11.333746   7.042773  ...       0.0       0.0        0
0     10.524522  11.337796   7.028271  ...       0.0       0.0        0
0     10.876583  11.337887   6.825786  ...       0.0       0.0        0
0     10.921662  11.337912   6.781842  ...       0.0       0.0        0
0     10.921662  11.337912   2.463362  ...       0.0       0.0        0
0  13709.964123  11.337912   2.463362  ...       0.0       0.0        0

[7 rows x 46 columns]
Started in middle at Index 15
          tphys    mass_1    mass_2  ...  bhspin_1  bhspin_2  bin_num
0  13710.921662  11.33791  2.463362  ...       0.0       0.0        0
0  13710.921662  11.33791  2.463362  ...       0.0       0.0        0

[2 rows x 46 columns]

Natal kick example

One example of where restarting a binary can be extremely helpful is studying how natal kicks affect a binary independently of its previous evolution. This is particularly relevant for Gaia BH1 and Gaia BH2 which are difficult to produce through the standard common envelope channels. We can still study the effect of natal kicks on these binaries if we restart the evolution after the mass transfer would occur. We can do this by using a binary which gets us to the right masses given the metallicity, then overwrite some of the initial conditions to resample the natal kicks and pre-explosion separation.

In [19]: from cosmic import utils

In [20]: import pandas as pd

In [21]: single_binary = InitialBinaryTable.InitialBinaries(
   ....:     m1=65.0, m2=0.93, porb=4500, ecc=0.448872,
   ....:     tphysf=13700.0, kstar1=1, kstar2=1, metallicity=0.014*0.6
   ....: )
   ....: 

In [22]: bpp, bcm, initC, kick_info = Evolve.evolve(
   ....:     initialbinarytable=single_binary, BSEDict=BSEDict, SSEDict=SSEDict
   ....: )
   ....: 

In [23]: for column in bpp.columns:
   ....:     initC = initC.assign(**{column:bpp.iloc[6][column]})
   ....: 

In [24]: initC = pd.concat([initC]*1000)

In [25]: initC['natal_kick_1'] = np.random.uniform(0, 100, 1000)

In [26]: initC['phi_1'] = np.random.uniform(-90, 90, 1000)

In [27]: initC['theta_1'] = np.random.uniform(0, 360, 1000)

In [28]: initC['mean_anomaly_1'] = np.random.uniform(0, 360, 1000)

In [29]: initC['porb'] = np.random.uniform(50, 190, 1000)

In [30]: initC['sep'] = utils.a_from_p(p=initC.porb.values, m1=initC.mass_1.values, m2=initC.mass_2.values)

In [31]: initC['bin_num'] = np.linspace(0, 1000, 1000)

In [32]: bpp_restart, bcm_restart, initC_restart, kick_info_restart = Evolve.evolve(
   ....:     initialbinarytable=initC, BSEDict=BSEDict, SSEDict=SSEDict
   ....: )
   ....: 

In [33]: bpp_BH = bpp_restart.loc[
   ....:     (bpp_restart.kstar_1 == 14)
   ....:     & (bpp_restart.kstar_2 == 1)
   ....:     & (bpp_restart.porb > 0)].groupby('bin_num', as_index=False).first()
   ....: 

In [34]: bpp_BH[['tphys', 'mass_1', 'mass_2', 'porb', 'ecc']]
Out[34]: 
Empty DataFrame
Columns: [tphys, mass_1, mass_2, porb, ecc]
Index: []